OEM barcode Scanner : 2D Barcode Engine: RT211
The RT211 is a super cost-effective 2d barcode engine, it also outstanding for its compact disign and small size, with decoder board embedded together and output decoded data directly. Not only readable bar codes from paper, but also from phone screen.
If your application is for one or two specific (in terms of bar code size and density) bar codes, you can choose this barcode engine, but if your application is for many different size and density bar codes, then you would use our others barcode engine.
Learn Its Performance By Video Demo
Ultra-compact, very small, with decoder board and imager 2-in-1
This compact, lightweight engine fits easily into even the most space-constrained equipment such as data collectors, meter readers, ticket validators, POS, vending machines, and PDAs.
This is a middle level but very lower price OEM barcode scanner module, it would be your excellent choice for general use for scanning usual bar code and QR code.
Read bar codes in paper or phone screen
It can read bar codes on paper, mobile phone screen and others LCD display
56mA (Typical), 132mA (Max)
3.4mA (TTL), 55.2mA (USB)
Host System Interfaces
TTL level serial. Or if with emulation kit: USB virtual COM, RS232
--20°C to 50°C
-40°C to 70°C
5% to 95% relative humidity, non-condensing
0 to 100,000 lux
25% minimum reflectance difference
Field of view
Roll: 360°, Pitch: ±45°, Skew: ±40°
Horizontal 45.6°, Vertical 34.2°
1 year factory warranty
2D: QR Code , PDF417, Data Matrix (ECC200,ECC000,050,080,100,140)
1D: Code 128, EAN-13, EAN-8, Code 39, UPC-A, UPC-E, Codabar, Interleaved 2 of 5, ITF-6, ITF-14, ISBN, Code 93, UCC/EAN-128, GS1 Databar, Matrix 2 of 5, Code 11, Industrial 2 of 5, Standard 2 of 5, Plessey, MSI-Plessey
Depth of field
EAN13 60mm-230mm (13mil)
QR code 40mm-120mm(15mil)
We provide 3D-Drawing, integration Guide which support your easy and quick integration work with your terminals.
Contact our sales people to get the full documents.
To facilitate our customer integration, we provide Screws, Flat cables, Connectors, USB/RS232 EVK (We also call it development kit board) and their schematic. But they are all optional, you can tell our sales people do you need them or not when you place order.
Program /Control the barcode scanner module by commands
For example, we can control the scanner's read/illumination... by sending commands to the scanner. We provide a detailed introduction to let you know how to do the command control. Ask our people to get full documents.
Setting Codes Programming
To program/ setup the scanner module, you can just simply do it by setting codes from the User manual we provide. Remember to read the "Enter setup" code when you begin to setup. Please ask our sales people for the full detailed user manual.
Contact Us To Get A Sample To Test Now!