Hand Held ID Card and Passport Reader: IDE302
—OCR-B/ MRZ & barcode scanner for ID card and passport
Specification✔️MRZ /PDF417 from ID card and passport ✔️1280*800 high-resolution CMOS sensor ✔️Manual trigger & Automatic reading | Connection⌨️ USB ✹ 🔌 RS232 ✹ (✹Optional) |
Features✔️ Fast reading from both screen and paper ✔️ With stand for hands-free and automatic reading ✔️ Windows, Linux, Android, Arduino, Raspberry PI ✔️ Application: Access control, Identity management, registration...
CertificateCE、FCC、RoHS | |
Video Demo
For OCR data reading from the passport, the best reading pattern is to hold the scanner on the stand, then make the distance from the scanner to the passport page around 20 cm. This way:
- There will be naturally a dip angle but not a vertical 90 degree between the scanner and the passport page， this can effectively avoid reflecting light back to the scanner.
- Around 20 cm is IDE302's best reading distance for OCR-B reading.
Read OCR-B MRZ
Read OCR-B of MRZ ( machine readable zone) from passport, ID card, driver’s license.
Read big size PDF417 from ID Card
With 1280*800 high resolution imager, the IDE302 readable those big size and high density PDF417 code from ID card / driver’ license, such as ID of Colombia, Costa Rica, El Salvador, Paraguay, Nicaragua, Panama...
It also supports read two bar codes by one scan, for example: read the two big and high-density QR codes in the Mexican new ID document.
Comparison with some other similar readers:
Technical Specification
Performance | ||
| Image Sensor | 1280 * 800 CMOS | |
| Illumination | White LED | |
| Aiming | Laser diode | |
| 2D: | ||
| Symbologies | PDF417, QR Code, Data Matrix | |
| Micro QR, Micro PDF417, GM, | ||
| Code One, etc. | ||
| 1D: | ||
| EAN-13, EAN-8, UPC-A, UPC-E, Code | ||
| 128, Code 39, Codabar, UCC/EAN | ||
| 128, RSS, ITF, ITF-14, ITF6, Standard 25, | ||
| Matrix 25, COOP 25, Industrial 25, | ||
| Plessey, MSI Plessey, | ||
| Code 93, Code 16K, etc. | ||
| OCR-B: | ||
| Machine readable passports (MRP): 2 lines of 44 characters | ||
| (Read distance: 15cm-30cm) | ||
| Travel documents: 3 lines of 30 characters | ||
| (Read distance: 14cm-30cm) | ||
| Resolution | ≥3mil (differ from different type bar codes) | |
| Typical Depth of Field | EAN-13 | 70-499mm (13mil) |
| Code 39 | 90-264mm (5mil) | |
| PDF417 | 70-225mm (6.7mil) | |
| Data Matrix | 65-214mm (10mil) | |
| QR Code | 40-294mm (15mil) | |
| Scan Mode | Sense mode (automatic mode), Manual trigger mode | |
| Scan Angle | Roll: 360°, Pitch: ±61°, Skew: ±61° | |
| Field of View | Horizontal 43°, Vertical 29° | |
| Min. Symbol Contrast | 25% | |
Mechanical/ | ||
| Interface | RS-232, USB | |
| Dimensions | 180mm x 80mm x 90mm | |
Electric | ||
| Weight | 194g | |
| Notification | Beep, LED indicator | |
| Operating Voltage | 5VDC±5% | |
| Current @ 5VDC | Operating | 280mA (typical) it must reach 900mA to active the scanner, so please make sure your system provide 900mA above current |
| Standby | 83.3mA | |
Environmental | ||
| Operating Temperature | -20℃ to 60℃ (-4°F to 140°F) | |
| Storage Temperature | -40℃ to 70℃ (-40°F to 158°F) | |
| Humidity | 5% to 95% (non-condensing) | |
Accessories | ||
| Cable | USB | Used to connect the IDE302 to a host device. |
| RS-232 | Used to connect the IDE302 to a host device. | |
| Power Adapter | DC 5V adapter to power the IDE302 with RS-232 cable. | |
Ask a Sample For Test Now
